Morphological change of gold-dendrimer nanocomposites by laser irradiation

Gold-dendrimer nanocomposites are prepared in aqueous solutions in the presence of poly(amidoamine)dendrimers (PAMAM) (generation 3 and 5) or poly(propyleneimine)dendrimers (PPI) (generation 3 and 4) by wet chemical NaBH(4) method. Thus prepared gold-dendrimer nanocomposites are irradiated by laser at 532 nm. UV-vis absorption spectroscopy and transmission electron microscopy reveal that the gold nanoparticles grow with the laser irradiation time as well as the fluence of the laser; in particular, the gold nanoparticles prepared at lower concentrations of PAMAM dendrimer as well as lower generations of PAMAM grow significantly. On the other hand, in the case of PPI dendrimers, the gold nanoparticles hardly grow by irradiation. In addition, dynamic light-scattering measurements show that the laser irradiation markedly promotes the association of the gold-PAMAM G3 dendrimer nanocomposites compared to that of the gold-PAMAM G5 dendrimer nanocomposites, while the sizes of association for the gold-PPI G3, G4 dendrimer nanocomposites hardly change by laser irradiation.     

Effect of pH on adsolubilization of single and binary organic solutes into a cationic hydrocarbon surfactant adsorbed layer on silica

The adsolubilization behaviors of 2-naphthol, biphenyl, and their binary solutes in the hexadecyltrimethyl ammonium bromide (HTAB) adsorbed layer formed on silica have been studied with solution pH. Two feed concentrations of HTAB are employed: 1.5 and 3.0 mmol dm(-3). At the feed concentration of 1.5 mmol dm(-3) HTAB, most of HTAB are adsorbed on the silica as a monolayer, while a bilayer formation occurs at the feed concentration of 3.0 mmol dm(-3). It is found that the adsolubilized amounts of respective single solutes increase with increasing solution pH except acidic region for biphenyl under a constant feed concentration of 2-naphthol (0.4 mmol dm(-3)) and biphenyl (0.047 mmol dm(-3)). The adsolubilization of binary solutes depends on the feed concentration of HTAB; at the low HTAB feed concentration, competitive adsolubilization between 2-naphthol and biphenyl occurs above pH 4.5, while at the high HTAB feed concentration the adsolubilization of biphenyl is enhanced by the incorporation of 2-naphthol over a whole pH region. These behaviors in the adsolubilization are discussed from the surfactant structure of HTAB adsorbed as well as the admicellar partitioning coefficients.     

Fine Tunable,Redox Active Octapalladium Chains Supported by Linear Tetraphosphines,Leading to Dynamically 1D Self-Assembled Coordination Polymers

A series of the octapalladium chains supported by meso-Ph₂PCH₂P(Ph)CH₂P(Ph)CH₂PPh₂ (meso-dpmppm) ligands, [Pd₈(meso-dpmppm)₄(L)₂](BF₄)₄ (L=none ( 1 ), solvents: CH₃CN ( 2 a ), dmf ( 2 b ), dmso ( 2 c ), RN≡C: R=Xyl ( 3 a ), Mes ( 3 b ), Dip ( 3 c ), ^tBu ( 3 d ), Cy ( 3 e ), CH₃(CH₂)₇ ( 3 f ), CH₃(CH₂)₁₁ ( 3 g ), CH₃(CH₂)₁₇ ( 3 h )) and [Pd₈(meso-dpmppm)₄(X)₂](BF₄)₂ (X=Cl ( 4 a ), N₃ ( 4 b ), CN ( 4 c ), SCN ( 4 d )), were synthesized by using 2 a as a stable good precursor, and characterized by spectroscopic (IR, ¹H and ³¹P NMR, UV-vis-NIR, ESI-MS) measurements and X-ray crystallographic analyses (for 1 , 2 a , b , 3 a , b , e , f , 4 a – d ). On the basis of DFT calculations on the X-ray determined structure of 2 b ( [2b-Pd₈]⁴⁺ ) and the optimized models [Pd₈(meso-Ph₂PCH₂P(H)CH₂P(H)CH₂PH₂)₄(CH₃CN)₂]⁴⁺ ( [Pd₈Ph₈]⁴⁺ ) and [Pd₈(meso-H₂PCH₂P(H)CH₂P(H)CH₂PH₂)₄(CH₃CN)₂]⁴⁺ ( [Pd₈H₈]⁴⁺ ), with and without empirically calculating dispersion force stabilization energy (B3LYP-D3, B3LYP), the formation energy between the two Pd₄ fragments is assumed to involve mainly noncovalent interactions (ca. −70 kcal/mol) with four sets of interligand C−H/π interactions and Pd⋅⋅⋅Pd metallophilic one, while electron shared covalent interactions are almost canceled out within the Pd₈ chain. All the compounds isolated are stable in solution and exhibit characteristic absorption at ∼900 nm, which is assignable to a spin allowed HOMO to LUMO transition, and shows temperature dependent intensity change with variable absorption coefficients presumably due to coupling with some thermal vibrations. The structures and electronic states of the Pd₈ chains are found finely tunable by varying the terminal capping ligands. In particular, theoretical calculations elucidated that the HOMO-LUMO energy gap is systematically related to the central Pd−Pd distance (2.7319(6)–2.7575(6) Å) by two ways with neutral ligands L ( 1 , 2 , 3 ) and with anionic ligands X ( 4 ), which are reflected on the NIR absorption energy of 867–954 nm. The isocyanide terminated Pd₈ complexes ( 3 ) further reacted with excess of RNC (6 eq) to afford the Pd₄ complexes, [Pd₄(meso-dpmppm)₂(RNC)₂](BF₄)₂ ( 13 ), and the cyclic voltammograms of 2 a (L=CH₃CN), 3 , and 13 (R=Xyl, Mes, ^tBu, Cy) demonstrated wide range redox behaviors from 2{Pd₄}⁴⁺ to 2{Pd₄}⁰ through 2{Pd₄}²⁺↔{Pd₈}⁴⁺, {Pd₈}³⁺, and {Pd₈}²⁺ strings. The oxidized complexes, [Pd₄(meso-dpmppm)₂(RNC)₃](BF₄)₄ ( 16 ), were characterized by X-ray analyses, and the two-electron reduced chain of [Pd₈(meso-dpmppm)₄](BF₄)₂ ( 7 ) was analyzed by spectroscopic and electrochemical techniques and DFT calculations. Reactions of 2 a with 1 equiv. of aromatic linear bisisocyanide (BI) in CH₂Cl₂ deposited insoluble coordination polymers, {[Pd₈(meso-dpmppm)₄(BI)](BF₄)₄}_n ( 5 ), and interestingly, they were soluble in acetonitrile, ³¹P{¹H} and ¹H DOSY NMR spectra as well as SAXS curves suggesting that the coordination polymers may exist in acetonitrile as dynamically 1D self-assembled coordination polymers comprising ca. 50 units of the Pd₈ rod averaged within the timescale.     

Synthesis of well‐defined block copolymer composed of flexible amphiphilic poly(ethylene glycol) and hydrophobic liquid crystalline segments by living coordination polymerization of allene derivatives and its application to thin film with perpendicularly oriented cylindrical nanostructure

A block copolymer composed of a flexible polar poly(ethylene glycol) (PEG) and a less polar liquid crystalline poly(allene) segments is prepared by the living coordination polymerization of an allene derivative possessing trans‐azobenzene‐containing mesogenic substituent by the use of a π‐allylnickel macroinitiator bearing PEG segment. The thin film of the block copolymer is prepared by the spin coating of its solution onto mica or silicon wafer which proves to possess perpendicularly oriented nanocylindrical microphase separated structures as supported by the differential calorimetric, polarized optical microscopic, grazing‐incidence small‐angle X‐ray scattering, transmission electron microscope, and atomic force microscope measurements.     

Improved Photobleaching for (1,10-phenanthroline)tris[4,4,4-trifluoro-1-(2-thienyl)-1,3-butanedionato]europium(III) Particle Embedded in Sol-Gel Derived Glass Film

In this research, we investigated improved photobleaching characteristics of (1,10-phenanthroline)tris[4,4,4-trifluoro-1-(2-thienyl)-1,3-butanedionato]europium(III) by forming nano-particles embedded into a sol-gel derived silica glass film by a conventional sol-gel process. The relative photoluminescence intensities after the UV irradiation for 90 min were 88, 76, and 67% for nano-particles in the sol-gel derived glass film, powders in the sol-gel derived glass film, and raw powders, respectively. This result indicates that the phtobleaching of this Eu-complex can improved by forming nano-partcile structures by a reprecipitation method and embedding in the sol-gel derived silica glass.     

Recent advances in scanning electrochemical microscopic analysis and visualization on lithium-ion battery electrodes

Scanning electrochemical microscopy is a family of techniques that probes the local electrochemical surface environments with micrometer- and nanometer-scale space resolution and sub-picoampere chemical sensitivity. A recent growing trend uses these probes to investigate surface systems related to lithium-ion batteries, yielding a prodigious amount of new information. In this review, we give an overview of the recent progress on the scanning electrochemical microscopy and related techniques’ breakthroughs on lithium-ion battery electrodes research.     

Amphiphilic liquid‐crystalline 4‐miktoarm star copolymers with a siloxane junction leading to cylindrically nanostructured templates for a siloxane‐based nanodot array

Well‐defined A₃B‐, A₂B₂‐, and AB₃‐type 4‐miktoarm star copolymers (M_n = 10,500–16,200, M_w/M_n = 1.16–1.18) consisting of poly(ethylene oxide) (PEO) and polymethacrylate bearing an azobenzene mesogen (PMA(Az)) as the arms and cyclotetrasiloxane as the core unit were synthesized using a combined route composed of a thiol‐ene click reaction and atom transfer radical polymerization. Microphase‐separated structures of the star copolymers in thin films with a thickness of approximately 100 nm were investigated by GISAXS and TEM. The A₃B‐type star‐(PEO)₃[PMA(Az)]₁ copolymer formed a more highly ordered PEO cylinder array with perpendicular alignment in the PMA(Az) matrix than that of the corresponding linear‐type block copolymer. The center‐to‐center distance of the PEO cylinders and the cylinder diameter were 13 and 4 nm, respectively. The highly ordered star‐(PEO)₃[PMA(Az)]₁ thin film was directly transferred to a siloxane‐based nanodot array by oxygen reactive ion etching. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1175–1188     

A cyclic oligophenylene containing two 1,8-naphthalene units bridged by two face-to-face biphenyl linkages exhibiting unusual strain and pi-pi interaction

1,8-[1,8-Naphthalenediylbis(4',4-biphenyldiyl)]naphthalene, a very stable strained cyclophane, has been synthesized in moderate yield using the copper-catalyzed coupling of 1, 8-bis(4-(tributylstannyl)phenyl)naphthalene. The X-ray analysis of the titled compound discloses bent p,p'-biphenylylene chains with splayed naphthalene rings, and the p,p'-biphenylylene chains located face-to-face indicate a fairly strong pi-pi interaction.